Stochastic bivariate time series models of waves in the North Sea and their application in simulation-based design     

《Applied Ocean Research》2019

In this paper, we present and evaluate three long-term wave models for application in simulation-based design of ships and marine structures. Designers and researchers often rely on historical weather data as a source for ocean area characteristics based on hindcast datasets or in-situ measurements. The limited access and size of historical datasets reduces repeatability of simulations and analyses, making it difficult to assess the sampling variability of performance and loads on marine vessels and structures. Markov, VAR and VARMA wave models, producing independent long-term time series of significant wave height (H_s) and spectral peak period (T_p), is presented as possible solutions to this problem. The models are tested and compared by addressing how the models affect interpretation of design concepts and the ability to replicate statistical and physical characteristics of the wave process. Our results show that the VAR and VARMA models perform sufficiently in describing design performance, but does not capture the physical process fully. The Markov model is found to perform worst of the tested models in the applied tests, especially for measures covering several consecutive sea states.  相似文献   

Boundary element analysis of liquid sloshing characteristics in axisymmetric tanks with various porous baffles     

《Applied Ocean Research》2019

This paper aims to investigate the effects of the porous baffles on the suppression of sloshing for the tanks with axisymmetric geometries under lateral excitation. Based on the assumptions of inviscid, irrotational, incompressible liquid and small amplitude sloshing, an axisymmetric boundary element method (BEM) for 3D Laplace equation is derived by using the Green's theorem together with the weighted residual method. And a zoning method is employed to model fluid domain in the tanks with complex porous baffles. Meanwhile, the porous baffles are treated motioning together with the tanks, and the velocity across the porous baffle is assumed to be linearly proportional to the pressure gradient between each side of the porous baffle. And the mechanism of suppressing the sloshing response is mainly the energy dissipation of the fluid passing through the porous baffle. Moreover, the linear free surface boundary conditions are also used to solve the governing equations. Compared with other numerical methods, the most prominent advantage of the BEM in solving axisymmetric potential problem is that only the boundaries of half the cross-section instead of the entire problem domain should be discretized, which can cut down large amount of memory and time costs. The present method is verified by comparing the numerical results with the existing literatures, and excellent agreements are obtained. Meanwhile, the proposed models are applied to investigate the effects of the porous baffles on sloshing response in circular cylindrical, annular cylindrical and conical tanks. The effects of the porous baffle length, porous-effect parameter, installation angle and baffle height on the sloshing force, natural frequency and surface elevation are studied. Additionally, some typical sloshing pressure distributions, velocity potential contours and velocity fields are plotted. The results show that swirls at the tips of the baffles can be observed in many cases, and the top-mounted porous baffle makes more significant suppression effects on sloshing response than that of bottom-mounted porous baffle, while increasing the number of ring porous baffles can achieve better restraint effects on sloshing response. And increasing the baffle length of the horizontal wall-mounted ring porous baffle can significantly decrease the sloshing frequencies, as well as the first non-dimensional natural frequency decreases with decrease in porous-effect parameter of the coaxial porous baffle. In addition, remarkable effects on sloshing can be obtained when reasonable designed by selecting the optimal porous-effect parameter, installation angle and baffle height. And this paper can be a useful guide for the seismic design and analysis of many actual liquid storage tanks (such as the Advanced Passive PWR, large water cooling tower, etc.).  相似文献   

An improved analytical approach for simulating the lateral kinematic distress of deepwater offshore pipelines     

《Applied Ocean Research》2019

Offshore pipelines are critical infrastructures and any possible damage may have devastating financial and environmental consequences. Earthquake-related geohazards (such as strong ground motion, active seismic faults, submarine landslides and debris flows) consist crucial threats that an offshore pipeline has to overcome. The main aim of the current study is to examine analytically a seabed-laid offshore pipeline subjected to a lateral kinematic distress due to a submarine landslide or a debris flow. Extra emphasis is given on the impact of pipe-soil interaction on the pipe response, by the realistic representation of the soil resistance via a tri-linear model. Firstly, the proposed analytical model is validated with a numerical model utilizing the finite-element method. Subsequently, various combinations of soil parameters and loading conditions that affect the examined problem are investigated with realistic input data taken from the offshore section of the high-pressure natural-gas pipeline TAP (Trans Adriatic Pipeline) in the Adriatic Sea. Finally, useful conclusions are drawn regarding the applicability and the efficiency of the proposed approach.  相似文献   

Hydrodynamic performance of a T-shaped floating breakwater     

《Applied Ocean Research》2019

The comprehensive utilization of floating breakwaters, specially acting as a supporting structure for offshore marine renewable energy explorations, has received more and more attention recently. Based on linear water-wave theory, the hydrodynamic performance of a T-shaped floating breakwater is semi-analytically investigated through the matched eigenfunction expansion method (MEEM). Auxiliary functions, to speed up the convergence and improve the accuracy in the numerical computations, are introduced to represent the singular behavior of fluid field near the lower salient corners of the structure. The effects of the height and installation position of the vertical screen on the reflection and transmission coefficients, dynamic response and wave forces are examined. It is found that the presence of the screen shifts the resonance frequency of RAO for both surge and pitch modes to the low-frequency area, while has no effect on heave mode. The identical added masses, damping and transmission coefficients can be obtained in the cases where the screen holds the same distance away from the longitudinal central axis of the upper box-type structure. Moreover, a relatively small pitch response can be achieved in a wide wave–frequency range, when the breakwater is Γ-shaped.  相似文献   

Experimental study on hydrodynamic performance of SWATH vessels in calm water and in head waves     

《Applied Ocean Research》2019

An extensive experimental investigation on four SWATH hull forms has been conducted in calm water and in regular waves at University of Naples Federico II. Calm water tests have been analyzed in the range of Froude number Fr_T from 0.1 to 0.6. For all four SWATH configurations at the speed, corresponding to Fr_T 0.32, the behaviour in regular waves has been tested. The results of heave, pitch and vertical accelerations are presented in nondimensional form as RAO. For the “most promising” SWATH #4 configuration, a set of stabilizing fins have been designed and an active stabilization system has been developed. The developed SWATH#5 has been tested in calm water on three displacements in the range of Fr_T from 0.1 to 0.65. The dynamic wetted surface has been identified and the residual resistance coefficient C_R as well as R_T/Δ are reported. Seakeeping tests have been performed in regular head sea and in head and following irregular sea at Fr_T = 0.50. The conditions for the occurrence of dynamic longitudinal instabilities have been identified. The results allows to comment the effect of slenderness of struts and SWATH’s immersed bodies on resistance and seakeeping and concerns the applicability of SWATH concept to small craft.  相似文献   

Instantaneous multi-mode identification and analysis of vortex-induced vibration via a mode decomposition method     

《Applied Ocean Research》2019

The dynamic characteristics of marine risers/pipes often present serried modes with various frequencies due to high levels of structural flexibility and slenderness, especially when the flow velocity is non-uniformly distributed along the span. Therefore, the vortex-induced vibration (hence VIV) for slender risers/pipes is usually characterized by multi-mode motions. In this paper, by means of a newly developed empirical mode decomposition (EMD) method which contributes to more efficient instantaneous multi-mode identification and analysis, new characteristics of a multi-mode “lock-in” vibration process of a large-scale flexible pipe subject to shear flow were discussed. Because the two-degree vibration along the span can be analyzed simultaneously, the effects of multi-mode VIV were investigated systematically. From the given illustrative examples, it was found that the vibration energy diffusion between the fluid and the structure, and among the participating modes, may be repeatable and reversible, or even irreversible, which causes VIV to be highly intricate. The coexistence of multiple modes, energy transfer, and mode switching/jump is observed when the reduced velocity is relatively high. The multi-dominant mode phenomenon is also found in both cross-flow (CF) and in-line (IL) VIVs. Energy transfers between the CF and IL directions occasionally occur, and CF VIV is apt to dominate the vibration process, because it is superior to IL VIV with the increment of the reduced velocity.  相似文献   

塑性极限分析鱼雷锚锚尖贯入阻力     

瑜璐  杨庆  杨钢  张金利 《岩土力学》2020,41(6):1953-1962

鱼雷锚安装过程中,锚尖形状影响尖部贯入阻力进而影响贯入深度。基于塑性极限分析理论下限法分析不同锚尖长径比x的椭圆形锚尖的贯入阻力和贯入阻力系数,并考虑了贯入深度、锚-土界面摩擦对贯入阻力以及贯入阻力系数的影响。结果表明:(1)锚-土界面光滑时,锚尖贯入阻力系数随着锚尖长径比的增大而减小;锚-土界面粗糙时,锚尖贯入阻力系数随着锚尖长径比的增大而增大。(2)摩擦力对贯入阻力系数的影响随着ξ增大而增大。(3)随着埋置深度增加,贯入阻力系数受x影响最小时所对应的摩擦系数逐渐减小。(4)当锚-土界面摩擦系数ω 0.75时,工程中可选用ξ1的锚尖用以减小端部贯入阻力;当ω0.26时,ξ1的锚尖提供更小的端部贯入阻力。锚尖长径比ξ=0和ξ=1的下限解与前人研究的桩基和圆形结构的理论解较为一致,进一步验证了所提出的椭圆形锚尖下限法模型的可行性。  相似文献   

海洋资源开发与海洋工程地质——第二届国际海洋工程地质学术研讨会(ISMEG 2019)总结     

刘晓磊  陆杨  王胤  杨庆  贾永刚 《工程地质学报》2020,28(1):169-177

2019年10月18~20日,第二届国际海洋工程地质学术研讨会(ISMEG 2019)在中国大连成功召开。本次研讨会是在国际工程地质与环境协会(IAEG)架构下由海洋工程地质委员会(C34)主办,海岸与近海工程国家重点实验室(大连理工大学)承办的全球性海洋工程地质学术研讨会。研讨会以"海洋资源开发与海洋工程地质"为主题,针对海洋土工程性质、海洋地质灾害与工程防护、海洋工程地质原位勘测、监测与试验模拟、海洋资源开发水动力环境与作用、海床沉积物和天然气水合物开采、海洋工程结构基础、海流-结构-海床相互作用等7个专题设置了10个特邀报告、21个主题报告及71个学术报告。作为国内外海洋工程地质研究者交流、分享、合作、创新的平台,国际海洋工程地质学术研讨会二度在我国召开,是对我国海洋工程地质学科快速发展的肯定,同时也对我国海洋工程地质研究取得高水平成果和成果转化提出了更高要求。  相似文献   

复杂载荷作用下立管触地段损伤管道的动力响应     

代云云  周晶  李志刚 《中国海洋大学学报(自然科学版)》2020,(1):145-153

触地段(Touchdown zone, TDZ)是在役钢悬链线立管(Steel catenary riser, SCR)的关键部位,在复杂载荷作用下,极易形成损伤缺陷,其载荷寿命的评估是深海结构工程中的一个关键问题。本文以大型有限元软件ABAQUS为平台,运用损伤管道实体单元与土弹簧阻尼单元相互作用的模型模拟触地段损伤海底管道在复杂载荷作用下的动力响应,数值计算考虑了管-土相互作用过程中的材料非线性、几何非线性以及接触非线性。讨论了单一环向体积损伤位于触地段管道的不同位置时,触地段损伤管道在不同载荷作用下的动力特性及特征点的动力响应。结果表明,管道所受内外压力以及管道提升端的竖向位移载荷会影响结构的自振频率;体积损伤部位的动力响应较完好部位更剧烈;体积损伤的位置和动力载荷频率对管道动力放大系数的影响很大;当动力载荷的激励频率越接近结构基频时,损伤管道的动力响应及动力放大系数越大。  相似文献   

多向不规则波浪作用下群墩结构上爬高的计算研究     

季新然  邹丽  任智源  柳淑学 《海洋学报》2019,41(3):35-43

波浪的方向分布对波浪的传播及其与工程结构物的作用都具有明显影响，目前现有的研究大多是基于单向波浪进行的。为了研究方向分布对群墩结构上的爬高影响，基于规则波浪与群墩作用的理论解，结合多向不规则波浪的造波方法，建立了多向不规则波浪与群墩作用的计算模型，同时进行了物理模型试验对模型的有效性进行了验证。系统地对群墩周围及表面上的波浪爬高进行了计算分析，结果表明，方向分布对波浪爬高具有较大的影响，且不同位置处的影响并不相同，在实际的工程设计中如果按照单向波浪计算，可能低估或者高估群墩周围的爬高。  相似文献